Onkyo TX-NR626 Owner's Manual page 18

Video Signal Flow Chart
Blu-ray Disc/DVD player, etc.
Composite Component
IN
AV receiver
MONITOR OUT
Composite Component
TV, projector, etc.
The composite video and component video outputs
pass through their respective input signals as they are.
Note
• In order for the AV receiver to upconvert component input
to HDMI output, the source output must be set to 480i/576i.
When signal is input at resolution of 480p/576p and more,
error message will be displayed.
■
Signal Selection
If signals are present at more than one input, the
inputs will be selected automatically in the following
order of priority: HDMI, component video, composite
video.
However, for component video only, regardless of
whether a component video signal is actually present,
if a component video input is assigned to the input
selector, that component video input will be selected.
And if no component video input is assigned to the
input selector, this will be interpreted as no
component video signal being present.
In the Signal Selection Example shown below, video
signals are present at both the HDMI and composite
video inputs. However, the HDMI signal is
automatically selected as the source and the video is
output by the HDMI outputs.
Blu-ray Disc/DVD player, etc.
Composite
HDMI
AV receiver
Composite
HDMI
• To by-pass the upconversion, set the "Picture
Mode" setting to "Bypass"
Audio components can be connected by using any of
the following audio connection formats: analog,
optical, coaxial, or HDMI.
When choosing a connection format, bear in mind
that the AV receiver does not convert digital input
signals for analog line outputs and vice versa.
If signals are present at more than one input, the
inputs will be selected automatically in the following
order of priority: HDMI, digital, analog.
Audio Signal Flow Chart
Blu-ray Disc/DVD player, etc.
Analog
AV receiver
*1 Depends on the "Audio TV Out (Main)" or "Audio TV
Out (Sub)" setting
*2 This is possible when "Audio Return Channel" is set to
"Auto" (➔ page
selected, and your TV is ARC capable.
Signal Selection Example
Component HDMI
IN
MONITOR OUT
HDMI
Component
TV, projector, etc.
(➔ page 61).
Optical Coaxial HDMI
IN
*1 *1
*1
OUT
HDMI
*1 *2
TV, projector, etc.
(➔ page 65).
66), the TV/CD input selector is
En-18
Tip
• When a signal is input via HDMI and the corresponding
input selector is selected, the HDMI indicator lights. In the
case of an optical or coaxial connection, the DIGITAL
indicator lights. In the case of an analog connection, neither
of the HDMI and DIGITAL indicators light.
AV Cables and Jacks
■
HDMI
HDMI connections can carry digital video and audio.
■
Component video
Component video separates the luminance (Y) and
color difference signals (P , P ), providing the best
B R
picture quality (some TV manufacturers label their
component video sockets slightly differently).
Green
Y
Blue
C /P
B B
C /P Red
R R
■
Composite video
Composite video is commonly used on TVs, DVDs,
and other video equipment.
Yellow
Connections