Epson SureColor F7070 User Manual page 70

Multi-Strike Printing
Choose the number of times each line is printed.
1. Use the d/u buttons to select Multi-Strike Printing and press the Z button.
2. Use the d/u buttons to choose a value.
3. Select the desired option and press the Z button.
4. Press the y button to return to the customize settings menu.
Roll Type
Choose Printable Side Out or Printable Side In according to how the media is rolled.
1. Use the d/u buttons to select Roll Type and press the Z button.
2. Use the d/u buttons to select the desired setting and press the Z button.
3. Select the desired option and press the Z button.
Tension Measurement
Periodically is recommended in most circumstances. Choose Off if slack develops in the
media or other printing problems occur.
1. Use the d/u buttons to select Tension Measurement and press the Z button.
2. Use the d/u buttons to select the desired setting and press the Z button.
3. Select the desired option and press the Z button.
Media Tension
Increase tension if creases appear in the media during printing. The higher the value, the
greater the tension.
If you have previously performed Feed Adjustment, you will need to perform it again after
adjusting Media Tension.
See "Feed Adjustment (manual)" on page 68.
1. Use the d/u buttons to select Media Tension and press the Z button.
2. Use the d/u buttons to choose a value.
70
Basic Operations