Epson SureColor F7070 User Manual page 58

6. Confirm that the media is attached without deformation.
As shown in the identified sections in the illustration below, if the tensions of the left and
right edges of the media are different, the media cannot be taken up correctly. If there
is slack on one side, repeat from step 1.
Note:
As shown in the illustration below, you can confirm differences in tension by lightly tapping
on both edges of the media.
7. Press the d button to feed the media until the take-up roll core begins to turn.
Important:
The auto take-up reel unit will not work if the tension bar is raised.
58
Basic Operations