Epson SureColor F7070 User Manual page 68

Setting Name
Name the media setting bank. Using distinctive names makes it easier to select banks for
use.
1. Select Setting Name and press the Z button.
2. Use the d/u buttons to display letters and symbols. When the desired character is
displayed, press the r button to select the next entry position.
Mistakes can be erased by pressing the l button to delete the previous character and
move the cursor back one spot.
3. After entering the name, press the Z button.
Feed Adjustment (manual)
Feed Adjustment is used to correct banding (horizontal banding, lines, or strips of uneven
color).
You need to visually inspect print results and enter a correction by hand.
For more information on feed adjustment, see "Feed Adjustment" on page 73.
Platen Gap
Adjust the platen gap (the gap between the print head and the media) if print results are
smudged.
1. Use the d/u buttons to select Platen Gap and press the Z button.
2. Use the d/u buttons to select the desired setting and press the Z button.
3. Press the y button to return to the customize settings menu.
Important:
Select 2.5 only if print results are still smudged when 2.0 is selected. Choosing a larger gap than
required may result in ink stains inside the printer, reduced print quality, or shorter product life.
Head Alignment (manual)
Select Head Alignment to correct print head misalignment when print results seem grainy
or out of focus.
You need to check the pattern and enter the optimum adjustment value for alignment.
68
Basic Operations