For more information on manual head alignment, see "Correcting Print Misalignment
(Head Alignment)" on page 71.
Drying
Allows you to set the drying time per pass.
1. Use the d/u buttons to select Drying and press the Z button.
2. Select Drying Time Per Pass and press the Z button.
3. Use the d/u buttons to change the time in increments of 0.1 second.
4. Select the desired option and press the Z button.
5. Press the y button twice to return to the customize settings menu.
Media Suction
While printing, the printer uses suction to provide the pressure needed to maintain the
correct distance between the media and the print head; the amount of pressure required
varies with the type of media. Less suction is used for thin media that would not print or
feed correctly at high levels of suction.
1. Use the d/u buttons to select Media Suction and press the Z button.
2. Use the d/ u buttons to choose a value.
3. Select the desired option and press the Z button.
4. Press the y button to return to the customize settings menu.
Head Movement
Choose the range in which the print head moves during printing.
1. Use the d/u buttons to select Head Movement and press the Z button.
2. Use the d/u buttons to select the desired setting and press the Z button.
For faster printing, select Data Width.
For even, high-quality printing, select Printer Full Width.
69
Basic Operations