Epson SureColor F7070 User Manual page 31

4. Raise the roll holder lever on the left side of the printer to lift the media into position,
then firmly insert the roll holder.
If the roll of media has an outer diameter which is less than 140 mm (5.5 inches), lift it
up by your hands, and place it on the roll holder. The roll core will not reach the holder
when raised using the roll holder lever.
5. Tighten the roll holder screw to fix the roll holder in place.
6. Raise the roll holder lever on the right side of the printer to lift the media into position,
then firmly insert the roll holder.
31
Basic Operations