Hitachi P50XR01E User Manual page 85

FEATURES (continued)
Multi Picture Mode (continued)
Activate in RGB mode
When you activate the Multi Picture mode in RGB Input, the large screen (Main-
screen) is RGB Input. The picture is displayed in PinP mode where the sub-
screen is displayed inside of the large screen (Main-screen).
1. To activate Multi Picture mode, press
Audio is output from the selected picture.
You can switch the Input modes (DTT, TV, AV1~5) or change channels only
when the sub-screen is the selected picture.
2. To change the selected picture, press
When the selected picture is the small screen (Sub-screen) in PinP mode,
the frame of the sub-screen is shown in yellow.
When the selected picture is the large screen (Main-screen) in PinP mode,
there is no yellow frame shown on Main-screen.
3. To change the channel of the sub-screen, press
4. To change the input mode of the sub-screen, press
control.
5. To change the position of the sub-screen in PinP mode, press
The position is changed as shown in the fi gure on the right.
6. To exit from the Multi Picture mode, press
NOTE
• Multi Picture Mode is not available during recording or playback.
84
button on the remote control.
button.
◄►
button.
button on the remote
or button.
button.
[PinP]
(Main-screen)
(Sub-
screen)