Hitachi P50XR01E User Manual page 29

CONNECTION (continued)
Connecting Procedure (continued)
Information
How to secure the power cord and cables
Step 1. Secure the power cord
After connecting power cord to the rear panel, secure the power cord with the clamp.
[Example : 50" model]
Step 2. Secure all cables
Secure all cables together with power cord by using large clamp.
Large clamp
[Example : 50" model]
NOTE
• The type of the large clamp depends on model.
• When you secure the cables, please be careful not to
tighten too much.
28
Clamp for the power cord
How to secure the large clamp
[50" model]
To set
To unfasten
Hook
[60" model]
To set
To unfasten
Knob
Set the clamp in the
direction of the arrow.
Loosen the hook, and
pull in the direction of the
arrow.
Push the clamp in the
direction of the arrow until
it clicks.
Whilst pushing the knob,
pull it in the direction of the
arrow.