Hitachi P50XR01E User Manual page 73

FEATURES (continued)
Channel List (DTT mode) (continued)
5. You can use the detailed setting by using setting section shown on the lower right.
Hide
Single Scan
Full Scan
Scan Setting
( XR01E
***
model only)
6. Press button (several times if necessary) on the remote control to return to Normal screen.
• Press button on the remote control to switch to TV Channel Manager screen.
• Press button to move to Channel Edit page. See
OK
72
Off
On
Off
In Standby
On
Off
In Operate
On
Time
Daily
Interval
Weekly
You can hide/show the channel which sets as "Skip On" by
pressing button whilst selecting "Hide".
OK
Off: Display all channels on the Channel List & EPG
regardless of "Skip On/Off". The indicator located on the
left of the icon will be black.
On: If set as "Skip On," the channel is not displayed on
Channel List & EPG. The indicator located on the left of
the icon will be green.
Search Digital channels manually.
Input the channel number by numeric key on the remote
control. Then, select [Scan] and press
scanning.
If a new channel is found, it will be added to the Channel
List.
Search Digital channels automatically. (auto search)
Select [Continue] & press
Digital channels.
Once Full Scan is applied, the setting for channel list,
Favourite Channel, View Timer, Recording Timer, and
Channel Lock will be restored to the original setting.
If set On, this operates Auto Scan whilst TV is in Standby/
Off. (The default setting is On.)
If set On, this operates Auto Scan whilst TV is On. It
automatically starts scanning at set time. (The default setting
is Off.)
Select the start time for Auto Scan. (The default time is
02:30.)
By using button, select a position to input, and input a
◄►
desired time by using
Select the preferred interval. (The default setting is Daily.)
38
for the details.
button to start
OK
button to start scanning all
OK
button.