Hitachi P50XR01E User Manual page 38

MAIN MENU OPERATION (continued)
Initial Setup Menu (continued)
Selected Items
Vertical Filter*
RGB Input
Frequency Mode
Upgrade (SD)
Upgrade (OAD)
Auto Upgrade*
Software
Maintenance
Auto Picture Reset*
Demo Mode
Thumbnail Snapshot
Resume
Repeat
Disk Setup
HDD Power Save
Format HDD
Current Lock Key
Lock Key New Lock Key
Confi rm
VIDEO Plus+ Channel (
***
ShowView Channel (
***
Menu Language*
Easy Setup
Reset TV Setting
NOTE
• Once Easy Setup is completed, the settings for Channel List, Favourite Channel, View Timer, Recording Timer and
Channel Lock will be restored to the original setting. (The current setting will be erased.)
• Please note that you cannot watch broadcasting during upgrading. It might take time for the upgrade processing,
depending on the software contents.
Caution about Format HDD
• Even the programme protected by Delete Lock will be deleted if HDD is formatted. Make sure that the important
programmes are recorded in video tapes before formatting HDD.
• It takes 30 seconds to format HDD, and HDD is not operated during that time.
• If HDD Power Save is On, it may take more time to start HDD.
Off
On
PC
Movie
Enable
Disable
Off
On
Off
1
2
0-10min
Off
On
Off
On
Off
On
XR01U model)/
XR01E model)
Setup hint
Reduce the fl ickers on the screen when set to [On].
Select [Movie] when you see the moving image on PC.
This upgrades TV by using data from SD card.
This upgrades TV by downloading data from broadcasting (OAD).
If select "Enable," the TV will check if any new software is
available every night at 3:00 am.
On: This returns all the picture setting to default condition
when turning on/off TV.
This is for demonstration at shops.
It is normally set Off.
Setting the time until the Thumb-nail is created.
You can start playing the recorded programme from the scene
you stopped watching in the previous time if this is set On.
You can play the recorded programme repeatedly if this is
set On.
This reduces the power consumption of HDD.
This formats HDD. When the message appears, select
"Continue" if you want to format HDD. All the data in HDD
are deleted.
This can change the Lock key (4 digit number).
The default Lock key is "0000".
If you forget the Lock key, enter "7777" in "Current Lock Key" to reset.
Set the same channel number of each Position as the
one of GUIDE Ch by using
Up/Down button. After selecting all the channel numbers,
press button to set.
OK
This can select preferred OSD language from the
following 19 languages by
English/French/German/Italian/Spanish/Dutch/Greek/
Turkish/Portuguese/Rumanian/Swedish/Norwegian/
Finnish/Danish/Czech/Polish/Hungarian/Slovene/Croatian
See for the detailed steps.
30
All items can be restored to the original factory settings by pressing
button. (This is available only for
OK
or Channel
◄►
button.
◄►
XR01E model.)
***
37