Input Switching To Dtt/Tv/Av1~5/Hdmi1~3/Rgb - Hitachi P50XR01E User Manual

BASIC OPERATION (continued)

Input Switching to DTT/TV/AV1~5/HDMI1~3/RGB

There are several ways to change the input mode as mentioned below.
Please select your preferred way.
You can select DTT and TV mode directly.
Press button on the remote control. Each time the button is pressed,
the mode is switched between DTT and TV mode.
Display Input Switching Banner to select the input mode.
1. Press button on the remote control or Input Select button on
the control panel to display Input Switching Banner.
2. Select the input mode.
Each time button on the remote control or Input Select button
on the control panel is pressed, the screen displays the
corresponding mode by following order.
DTT TV
RGB HDMI 3
Also, you can change the input mode back and forth by using
button on the remote control or Volume Up/Down button on the
control panel.
Input Mode buttons (AV1~AV5, HDMI 1~3 and RGB mode)
After pressing button, press the desired Input Mode button on the
remote control.
NOTE
• Whilst recording external input, AV4 cannot be selected.
AV1 AV2 AV3 AV4
HDMI 2 HDMI 1 AV5
Input
◄►
Input Select button
AV1
AV
Composite
AV1
Input Select button
Input Mode
button
Volume Up button
Volume Down button
33