Printhead Removal - Epson Stylus COLOR 880 Service Manual

EPSON Stylus COLOR 880
Waste ink pad replacement
Figure 5-13. Sequential repair service program main menu
The "Adjusted item" in the right column shows you the adjusted item which
executed in this program and it is easy to confirm the adjusted value. Following
explain you the common function of the Sequential repair service program.
Quit
If you want to exit this program, click the "Quit" button. Following menu is
displayed on the screen. And clicking the "Quit" Button in the following menu exit
the adjustment program completely. Clicking the "Next" button returns to the Top
menu (Initial setting menu) of Figure 5-10.
Figure 5-14. Quit function
Top Menu
This function is used to stop the adjustment in the each sequential program and
clicking this "Top Menu" button returns to the Sequential repair service program
main menu of the Figure 5-13
Adjustment

5.3.2 Printhead removal

When you remove the printhead from the printer mechanism and reinstall the
removed printhead to the printer mechanism, this repair item should be
selected in the Sequential repair service program.
1) Install the removed printhead to the CR unit on the repair printer
mechanism.
2) Select the "Printhead removal" in the Sequential repair service program.
Following Printhead removal top menu is displayed.
Sequential Repair Service Program feature
Figure 5-15. Printhead removal program menu
Revision A
128