Epson Stylus Color 880 Start Here

Start Here

1
1
Set Up the
Set Up the
Printer
Printer
Unpack Everything
Remove all the tape and packing material from the inside and outside of your printer, as shown here. The
tape may be in slightly different locations on your printer.
Your printer comes with the items shown here. Make sure you've got a USB or parallel cable to connect your
printer. See "Windows System Requirements" or "Macintosh System Requirements" in the Printer Basics book.
ink cartridges
Don't place the printer in areas:
• with high temperature or humidity
• in direct sunlight or dusty conditions
• with poor ventilation
• near sources of heat or electromagnetic interference,
such as a cordless telephone base unit
Follow all the "Important Safety Instructions" listed in the Printer Basics book.
Put On the Paper
Support
Insert the paper support into the slots on the back
of the printer.
Connect the Printer to
Your Computer
Connecting to a USB Port
(Recommended connection: only for Windows
Macintosh ® G3 or later systems; see "Windows System Requirements" or "Macintosh System
Requirements" in the Printer Basics book for details.)
1
Make sure the printer and computer are turned off.
2
Connect the
USB port.
3
Connect the
USB port or a first-tier hub port.
If you're using a USB hub, connect the printer to the first tier of the hub or the printer may
malfunction. If the printer doesn't work there, connect it directly to a USB port on your
computer.
EPSON
CD-ROM
Media Pack
®
end of the USB cable to your printer's
end of the cable to your computer's
Stylus
®
98, Windows Me, Windows 2000, iMac
Color 880/880i/8
®
paper support
Printer Basics
TM
, and Power
3