Printhead Replacement - Epson Stylus COLOR 880 Service Manual

EPSON Stylus COLOR 880
7) Select the most aligned pattern number in the printed pattern and input the
number in the following menu.
Figure 5-19. Input the suitable pattern number
NOTE: When you enter the value, a check mark will be shown in the box.
8) Click on the "Input" button after a suitable pattern number has been
entered to store the value in the printer. Then, press the "Print" button and
confirm the results of the reprinted check pattern.
9) Repeated Step 6) to Step 8) to adjust the Bi-directional print alignment
completely.
If you exit this Bi-directional print alignment program, click the "Complete"
button on the above Figure 5-19.
10) Click the "Top Menu" button to exit the program.
Adjustment

5.3.3 Printhead replacement

When you replace the printhead with new one, this repair item should be
selected in the Sequential repair service program.
1) Replace the Printhead with the new one and select the "Printhead
replacement" item in the Sequential repair service program menu.
Following "Printhead replacement" menu is displayed.
2) Input the 11digits code by referring the head ID label stacked on the
Printhead and click the "OK" button.
Sequential Repair Service Program feature
Figure 5-20. Printhead replacement program menu
Figure 5-21. Head ID input menu
Revision A
130