Epson Stylus C 60 Service Manual page 70

EPSON Stylus C60
Table 3-13. Check point for the error before the initial ink charge according to each phenomenon
Occurrence
timing Detailed phenomenon
CR position
The printer does not perform the ink
replacement CL and the error is
indicated with LEDs and STM3.
Power on
The printer does not perform the printing
Anywhere
operation and the error is indicated with
LEDs and STM3.
LED indication
Error condition
STM3 message
Power : -
Multiple papers Error : -
are always loaded
No appear
Occurrence
timing Detailed phenomenon
CR position
Any error condition is not indicated with
Operation
the LEDs and STM3. But, multiple
-
papers are always loaded from ASF unit.
Troubleshooting
Defective
unit/part name
Ink cartridge
Ink cartridge
Table 3-14. Multiple papers are always loaded without LEDs and STM3
Occurrence CR position at the
timing power on timing
Operation -
Table 3-15. Check point for multiple papers are always loaded without LEDs and STM3
Defective
unit/part name
ASF unit
Unit Level Troubleshooting
Check point
1. Check if ink cartridge can be used by install it to other
printer.
1. Check if the ink is remaining in the I/C.
2. Check if the ink cartridge can be used by install it to other
printer.
Unit/Part name
ASF unit The Tension spring 29.1 comes off.
Check point
1. Check if the Paper return plate operates correctly in the
paper loading sequence.
Remedy
1. Replace the ink cartridge with brand-new
one.
1. Replace the ink cartridge with brand-new
one.
2. Replace the ink cartridge with brand-new
one.
Possible cause
Refer to Table 3-15
Remedy
1. Reassemble the Tension spring 29.1 between
the ASF frame and the Paper return plate.
Torsion spring 29.1
Revision A
Check table
65