Epson Stylus C 60 Service Manual page 61

EPSON Stylus C60
LED indication
Error condition
STM3 message
Power : On
Error : On
Paper jam error
Paper jam
Troubleshooting
Table 3-6. Paper jam error condition and possible cause
Occurrence CR position at the
timing power on timing
Outside HP
Operation
-
Paper guide upper/left
Unit Level Troubleshooting
Unit/Part name
The Torsion spring 0.22 for HP sensor lever comes off.
Holder shaft unit
The HP/PE sensor cable is not placed correctly.
ASF unit The Compression spring 29.1comes off.
The Star wheel comes off.
Front frame The Front frame is bent down.
The Front frame is not assembled correctly.
Holder shaft unit The Torsion spring 0.22 for PE sensor lever comes off.
The Paper eject roller shaft comes off. *
Paper eject roller unit
The Spur gear 60 comes off.
The Paper guide upper/left comes off completely.
Possible cause
Refer to Table 3-7
Revision A
Check table
56