Working Method D; Breast Welt Pockets, Automatic Feed And Matching Of The Breast Welt - Duerkopp Adler 745-34 Operating Instructions And Replacement Parts Manual
Sewing unit for runstitching of piped flap and welt pocket openings and pocket corners working methods: a, b, d, f
Hide thumbs
Also See for 745-34:
- Service instructions manual (156 pages) ,
- Installation instructions manual (24 pages) ,
- Spare parts (167 pages)
Table of Contents
Advertisement
2.15.5
Working method D
Breast welt pockets, automatic feeding and matching of the breast welt
56
The maximum sewing length for breast welt pockets is 145 mm.
The positioning device allows an overlapped working method.
Sewing patterned or plain goods
When processing plain goods it is not necessary to align
jacket front part and breast welt 2 as per pattern.
This results in a more rapid working method for plain goods (see page 58)
Aligning the positioning aids
Height of the positioning device:
–
Set the height of the positioning device at the adjusting aid.
It must be possible to shift the jacket front part under the
positioning device unhindered.
Advertisement
Table of Contents
