Setting The Working Height; Mounting For The Form Set - Duerkopp Adler 743-221 Installation Instructions Manual

3.2 Setting the Working Height

3.3 Mounting for the Form Set

The working height is adjustable between 84.5 cm and 124.5 cm.
The sewing unit was brought into the lowest position for shipping.
Setting the working height
–
Loosen fastening screws 1 to 4.
–
Set the unit to the desired height horizontally.
–
Tighten fastening screws 1 to 4.
During transport the mounting 1 for the form set 2 is located under the
table top.
–
Remove the mounting screws.
–
Turn the mounting 1 180°.
–
Attach the mounting screws again.
1
2
1
2
3
4
5