Sewing With Flap; Sewing Without Light Barrier - Duerkopp Adler 745-34 Operating Instructions And Replacement Parts Manual

2.15.2 Sewing with flap

Field of application
Production of trousers
Production of jackets

2.15.2.1 Sewing without light barrier

For the simultaneous sewing-in of flaps or other additional parts the
following optional equipment is required according to the field of
application:
Production of trousers: Flap clamp, right (Order No. 0792 011162)
Production of jackets: Flap clamp, left
Selecting the closing order of the flap clamps
Position
right
left
–
Set the closing order of the flap clamps 4 at the control panel under
the
menu item "Program Parameters" (Symbol
Shaped guide for flap
The unmachined part 2 is delivered with the flap clamp 1.
It has to be machined as a shaped guide corresponding to the flap
used.
ATTENTION!
The flap length must correspond to the desired length of the pocket
opening.
(Order No. 0792 011161)
Closing order of the flap clamps
Right flap clamp closes first
Left flap clamp closes first
1 2
).
37