Adjusting Working Height; Pedal Adjustment - Duerkopp Adler 550-767 Installation Instructions Manual
Engineered work station for side airbag tearing seam
Hide thumbs
Also See for 550-767:
- Fitting instructions (2 pages) ,
- Operating instructions manual (66 pages) ,
- Parts list (79 pages)
Table of Contents
Advertisement
2.6 Adjusting working height
2.7 Pedal adjustment
6
The working height is adjustable between 685 mm and 1085 mm
(measured to the upper edge of the table plate).
The working height is factory-set to 790 mm.
–
Adjust the working height as required by pressing button 1.
The angle of the pedal 3 should be such that the operator can
comfortably move it forwards and backwards.
–
Undo screw 2.
–
Adjust pedal 3 as required.
–
Retighten screw 2.
3
1
2
Advertisement
Table of Contents
