Adjusting The Sewing-Foot Pressure; Adjusting The Stitch Length - Duerkopp Adler 69 Operating Instructions Manual

5.12 Adjusting the sewing-foot pressure

1
Sewing-foot pressure is adjusted with screw 1.
–
to increase sewing-foot pressure: turn screw 1 clockwise
–
to reduce sewing-foot pressure: turn screw 1 anticlockwise.

5.13 Adjusting the stitch length

–
Turn wing-nut 2 anticlockwise as far as it will go.
–
Adjust the desired stitch length with screw 3.
To increase stitch length: turn screw 3 anticlockwise.
To reduce stitch length:
–
Tighten wing-nut 2 clockwise.
To sew bar tacks manually (backwards sewing):
–
Swivel the stitch-length handle 4 up as far as it will go (to position "R").
The machine sews backwards as long as the stitch-length handle 4 is held up.
20
Caution: danger of injury
Turn off the main switch.
The stitch length may only be adjusted with the sewing
machine switched off.
The stitch-length handle 4 moves down.
turn screw 3 clockwise.
The stitch-length handle 4 moves up.
2
3
4