Adjusting The 2Nd Stitch Length - Duerkopp Adler 868 Service Instructions Manual

2.3.2

Adjusting the 2nd stitch length

4 3 2 1
Caution: Risk of injury !
Turn the main switch off !
Set the basic stitch adjustment only with the sewing
machine switched off.
Set the upper setting wheel 1 to "0".
–
Unscrew screw 2 and pull off the setting wheel 3.
–
Cautiously turn the shaft 5 by using a 10 mm wrench in clockwise
–
direction as fas as it will go.
Set the scale 4 to position "0".
–
Put the setting wheel 3 back on again an tighten it with screw 2.
–
4 5
GB
13