Cut-Sheet Feeder Disassembly And Reassembly - Epson LQ-510 Technical Manual

REV.-A

3.3.3 CUT-SHEET FEEDER DISASSEMBLY AND REASSEMBLY

This section describes the procedure for removing the hopper unit of the C80612 cut-sheet feeder. Unless
otherwise specified, reassembly is performed by reversing the sequence. The diagrams in Figure A-34, which
are provided as reference for disassembly and reassembly, show an exploded view of the parts configuration.
The required tools are listed in Table 3-7.
Phillips screwdriver no. 2
E-ring holder #6
o: commercially available
If it is necessary to replace one of the paper-loading rollers, both right and left rollers must be replaced
at the same
time.
LQ-510
Table 3-7. Tools for Assembly or Disassembly
Tool
I
WARNING
Availability Part No.
8743800200
0
8740800800
0
OPTIONAL EQUIPMENT
3-11