Default Values; Figure 1-10. Lever Position; Adjust Lever Operation; Table 1-18. Lever Position - Epson LQ-510 Technical Manual

REV.-A

1.8.7 DEFAULT VALUES

When the printer is initialized, the following default values and functions are set:
Page Position
Left and Right Margin
Line Spacing
Vertical Tabs
Horizontal Tabs
VFH Channel
Family Number of Type
Style
Download Characters
Justification
Character Spacing
Bit-Image Mode Assignment
Printing Effects
Condensed Printing

1.8.8 ADJUST LEVER OPERATION

The position of the adjust lever must be set to accord with the paper thickness. If the lever is set to position
four or above, the MULTI-PART indicator lights and the printing speed is increased. See Table 1-18 and
Figure 1-10.
If the printing density is light, position the adjust lever one step lower.
l
LQ-510/550
The current paper position becomes the top-of-form position
Released
1/6 inch
Cleared
Every 8 characters (relative)
Channel 0
Font selected by DIP switch
Deselected (if software initialization)
Cleared (if hardware initialization)
Left justification
10 cpi
ESC K = ESC* 0, ESC L = ESC * 1
ESC Y = ESC * 2, ESC Z = ESC * 3
All effects other than condensed printing are cleared
Setting selected by DIP switch

Table 1-18. Lever Position

2nd position
4th position

Figure 1-10. Lever Position

GENERAL DESCRIPTION
1-23