Multi-Font Module (Tom4 Board) - Epson LQ-510 Technical Manual

OPTIONAL EQUIPMENT

3.2 MULTI-FONT MODULE (TOM4 BOARD)

The optional multi-font module (7407) provides the LQ-510 with seven additional fonts.
This module provides seven different font types (Courier, Prestige, Script, OCR-B, OCR-A, Orator,
1.
Orator-S).
2. "Orator" and "Orator-S" are new additions.
3. A rotary switch can be used for selecting the font.
At power up, the font choice is based on the setting of the module's rotary switch. Settings 2 through 8 in-
dicate fonts shown in Table 3-5. If the switch is set to "0," "1", or "9," the printer ignores the module. Font
selection occurs immediately following the printer selection of the module slot, and the module must be in-
stalled at that time if font selection is to occur.
3-4
Figure 3-1. External Appearance of the Multi-Font Module
Table 3-5. Character Sets
Number Font Type
Courier
Prestige
Script
OCR-B
OCR-A
Orator
I Orator-S
Character Setting
10, 12, 15 cpi
10, 12, 15 cpi
10, 12, 15 cpi
10 cpi
10 cpi
10 cpi
10 cpi
REV.-A
LQ-510