Epson LQ-510 Technical Manual page 138

DISASSEMBLY, ASSEMBLY, AND ADJUSTMENT
3. Insert a standard screwdriver into each of the two holes at the front of the lower case, and gently push
(see Figure 4-5) to unlock the notches.
(see Figure 4-5) to unlock the notches.
4. While lifting the upper case, disconnect the cable of the control panel (SANPNL) from connector CN4
on the SAMA board. Then remove the upper case.
4-6
The
notch can be unlocked by
pushing it in the direction shown by
the arrow using the screwdriver.
Figure 4-5. Upper Case Removal - 1 Figure 4-5. Upper Case Removal - 1
Figure 4-6. Upper Case Removal - 2
Upper Case Guide Upper Case Guide
Lower Case Notch Notch
REV.-A
LQ-510