4.2.4.17 Paper Feed Roller Unit Removal
2. Separate the main and base units (Refer to Section 4.2.4.1 2.).
3. Remove three paper feed springs for the LQ-850 or four for LQ-1 050 from the hook on the base
frame.
4.2.4.18 Paper End Sensor Removal
Remove the printer mechanism (refer to Section 4.2.3. 1.).
2.
Separate the main and base units (Refer to Section 4.2.4.1 2.).
3.
Loosen the two bends securing the paper end sensor to the back of the paper guide.
4.
Remove the paper end sensor.
Paper Feed Spring
Fig. 4-46. Paper Feed Roller Unit Removal
Fig. 4-47. Paper End Sensor Removal
4-35
Base Frame