REV.-A
4.2.4.9 Friction/Tractor Sensor Removal
Remove the printer mechanism (Refer to Section 4.2.4. 1.).
2.
Position the paper release lever
3.
Remove the paper feed motor (Refer to Section 4.2.4.7).
4.
Remove the CPS(P) (3 X 10) screw securing the friction/tractor
remove the sensor.
Make sure of the sensor direction and set in place before mounting the friction/tractor sensor on
the side frame R.
at the its
back setting.
\ .
Side F~~e R
Fig.
4-28. Friction/Tractor Sensor Removal
ASSEMBLY POINT
4-24
sensor to the side frame R, then
/ ' "
Lever
10)