Upper Case Removal - Epson LQ-1050 Technical Manual

4.2.1 Upper Case Removal

To check the interior of this printer, first remove the upper case using the steps listed in the paragraphs
below.
Prior to beginning the following procedures, be sure to disconnect the power cord and interface
cable, and remove the paper installed in the printer.
Remove two CBB (4 X 12) screws securing the upper and lower cases.
2. Detach the upper case by pressing in on the two retaining clips inside the front of the printer.
3. Remove the control panel from the upper case depressing two hooks and disconnect the cable.
(a) Bottom View
Fig. 4-6. Disconnect the Control Panel from the Upper Case
4. Remove the upper case.
Before setting the upper case back onto the lower case, adjust the paper release lever toward the
back.
DANGER
Retaining Clip
/
Fig. 4-5. Upper Case Removal
A S S E M B L Y P O I N T
4-7
\
(b) Top View