Table of Contents
Advertisement
9.9 Buttonhole and sequence programming: a brief description
9.9.1 Selecting a buttonhole number
9.9.2 Entering parameters
32
–
Push the pedal back:
the cloth carrier plate and hook turret move to their starting
positions
–
Press "P":
The display switches from sewing mode to buttonhole programming
mode.
In this mode the buttonhole parameters can be changed.
–
The buttonhole number line appears on a dark background.
–
If you wish to change the buttonhole displayed, skip to
section 9.9.2.
–
If you wish to change a buttonhole that is not displayed or program
a new buttonhole, press OK.
Use the ñ and ò keys to display buttonholes already programmed.
–
–
If a new buttonhole is selected, a "*" appears before the buttonhole
number.
–
Select a buttonhole number and press OK to confirm.
Use the ñ and ò keys to select the parameter to be changed.
–
–
The line containing the selected parameter appears on a dark
background.
–
Press OK.
The cursor flashes under the value of the selected parameter and
only the symbol appears on a dark background.
Use the ñ and ò keys to set the required value.
–
Use the ï and ð keys to change the cutting mode.
–
–
Press OK.
The set value is accepted.
–
If you do not wish to accept the changed value, press the "ESC"
key.
The original value is restored.
Use the ñ and ò keys to select and change further parameters.
–
–
Press the "ESC" key to leave buttonhole programming mode.
The machine is now in sewing mode and thus ready for operation.
Advertisement
Table of Contents
