Adding A Buttonhole At The End Of A Sequence; Deleting A Buttonhole Within The Buttonhole Sequence; Inserting A Buttonhole Within The Buttonhole Sequence - Duerkopp Adler 540-100-1 Operating Instructions Manual

4.7.2

Adding a buttonhole at the end of a sequence

4.7.3

Deleting a buttonhole within the buttonhole sequence

4.7.4

Inserting a buttonhole within the buttonhole sequence

–
Select the last line "Buttonhole X: 0" in the programmed buttonhole
sequence with the arrow keys ñ and ò.
–
Press the OK-key.
–
Select the desired buttonhole program (1 to 50) with the arrow
keys ñ and ò.
–
Press the OK-key to confirm the selection.
With the confirmation of the buttonhole program a new menu line
appears containing the buttonhole to be programmed.
–
Press the ESC-key to return to main menu.
–
Select the buttonhole program line that is to be deleted with the
arrow keys ñ and ò.
–
Press the OK-key.
Select buttonhole program "0" with the arrow keys ñ and ò
–
–
Press the OK-key to confirm.
With the confirmation the selected buttonhole will be deleted. Following
buttonholes (if any) will move up.
–
Press the ESC-key to return to the main menu.
Note
The insertion of a single buttonhole program within a buttonhole
sequence is not possible.
–
Make a note of the programmed buttonholes following.
–
Select the desired line of the programmed buttonhole sequence
with the arrow keys ñ and ò.
–
Press the OK-key.
–
Select the desired buttonhole program (1 to 50) with the arrow
keys ñ and ò. Press the OK-key to confirm the setting.
–
Then alter the following buttonholes according to your notes.
–
Press the ESC-key to return to main menu.
1
25