Changing The Needle - Duerkopp Adler 579 Operating Instructions Manual

3.3

Changing the needle

12
3
Caution: danger of injury
The needle must be changed with the machine switched off or in the
"firm hold" position.
Undo screw 1.
–
Pull the needle 2 out of the needle bar.
–
Push the new needle as far as it will go into the hole in the needle
–
bar.
Align the needle 2 so that its throat points forward and the surface
–
3 on the needle piston to the left (in the direction of the attachment
screw 1).
Tighten screw 1.
–
1
2