9.10 Setting buttonhole sequences: a brief description
9.10.1 Selecting a buttonhole sequence
9.10.2 Changing a sequence
34
Push the pedal back:
–
the cloth carrier plate and hook turret move to their starting
positions.
Press "S".
–
The display switches from sewing mode to sequence mode:
in this mode sequences can be programmed.
The line sequence number appears on a dark background.
If you wish to change the sequence displayed, skip to
–
section 9.10.2.
If you wish to change a sequence that is not displayed or program
–
a new sequence, press OK.
Use the ñ and ò keys to display sequences already programmed.
–
If a new sequence is selected a * appears before the sequence
–
number.
Select a sequence number and press OK.
–
Use the ò key to select the line containing the buttonhole
–
sequence and press OK.
Now the buttonhole sequence can be changed.
Use the ñ and ò keys to select the buttonhole number be changed.
–
If you wish to delete a buttonhole from the sequence, select
buttonhole number 0.
Use the ï and ð keys to select the column containing the
–
buttonhole number to be changed.
When programming is complete press OK.
–
If the changed sequence is not to be saved, press the "ESC" key.
–
The original sequence is restored.
Pressing the "ESC" key leaves sequence mode. The machine is
–
now in sewing mode and thus ready for operation.