Speaker - Yamaha RX-V473 Owner's Manual

Speaker

Configures the speaker settings manually.
S e t u p
S p e a k e r C o n f i g u r a t i o n
H D M I D i s t a n c e
S o u n d L e v e l
E C O E q u a l i z e r
F u n c t i o n T e s t T o n e
N e t w o r k
L a n g u a g e
■
Configuration
Configures the output characteristics of the speakers.
• When you configure the speaker size, select "Large" if the woofer diameter of your speaker is 16 cm
(6-1/4") or larger or "Small" if it is smaller than 16 cm (6-1/4").
❑ Power Amp Assign
(RX-V573 only)
Selects a speaker system.
In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations
are possible using the Zone B speakers or bi-amp connection.
Settings
Select this option when you use a normal speaker system (not using
Basic (default)
Zone B speakers or a bi-amp connection).
Select this option when you connect front speakers that support
BI-AMP
bi-amp connections (p.16).
Select this option when you use Zone B speakers (p.60) in addition to
ZoneB
the speaker system in the main zone (Zone A).
❑ Subwoofer
Selects whether or not a subwoofer is connected.
Settings
Select this option when a subwoofer is connected.
Use (default)
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
Select this option when no subwoofer is connected.
None
The front speakers will produce LFE (low-frequency effect) channel
audio and low-frequency components from other channels.
❑ Front
Selects the size of the front speakers.
Settings
Select this option for small speakers.
Small (default)
The subwoofer will produce front channel low-frequency components
(configurable in "Crossover").
Select this option for large speakers.
Large
The front speakers will produce all of the front channel frequency
components.
• "Front" is automatically set to "Large" when "Subwoofer" is set to "None".
❑ Center
Selects whether or not a center speaker is connected and its size.
Settings
Select this option for small speakers.
Small (default)
The subwoofer or front speakers will produce center channel
low-frequency components (configurable in "Crossover").
Select this option for large speakers.
Large
The center speaker will produce all of the center channel frequency
components.
Select this option when no center speaker is connected.
None
The front speakers will produce center channel audio.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
69
En