Network - Yamaha RX-V473 Owner's Manual

4
To change another input source name, repeat steps 1 to 3.
5
To exit from the menu, press SETUP.
■
Dimmer
Adjusts the brightness of the front display.
Setting range
-4 to 0 (higher to brighten)
Default
0
• The front display may become dark when "ECO Mode" (p.76) is set to "On".
■
Memory Guard
Prevents accidental changes to the settings.
Settings
Off (default) Does not protect the settings.
On Protects the settings until "Off" is selected.
• When "Memory Guard" is set to "On", the lock icon (o) is displayed on the menu screen.
o
M e m o r y G u a r d
M e m o r y G u a r d O n
B a c k : R E T U R N
Icon

Network

Configures the network settings.
S e t u p
S p e a k e r I P A d d r e s s
H D M I M A C A d d r e s s F i l t e r
S o u n d D M C C o n t r o l
E C O N e t w o r k S t a n d b y
F u n c t i o n N e t w o r k N a m e
N e t w o r k I n f o r m a t i o n
L a n g u a g e N e t w o r k U p d a t e
■
IP Address
Configures the network parameters (such as IP address).
❑ DHCP
Select whether to use a DHCP server.
Settings
Does not use a DHCP server. Configure the network parameters
Off
manually. For details, see "Manual network settings".
Uses a DHCP server to automatically obtain the unit's network
On (default)
parameters (such as IP address).
■
Manual network settings
1
Set "DHCP" to "Off".
2
Use the cursor keys (q/w) to select a parameter type.
IP Address Specifies an IP address.
Subnet Mask Specifies a subnet mask.
Default Gateway Specifies the IP address of the default gateway.
DNS Server (P) Specifies the IP address of the primary DNS server.
DNS Server (S) Specifies the IP address of the secondary DNS server.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a value.
4
To exit from the menu, press SETUP.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
77
En