Table of Contents
Advertisement
1
2 3 4 5 6 7 8 9 10
Speaker placement
1
Placing speakers
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
Caution
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit's speaker impedance to "6 Ω MIN". In this case, you can also use 4-ohm speakers as the front speakers.
For details, see "Setting the speaker impedance" (p.14).
• (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6 Ω.
Speaker type
Abbr.
1
Front (L)
Produce front right/left channel sounds (stereo sounds).
2
Front (R)
3
Center
Produces center channel sounds (such as movie dialogue and vocals).
4
Surround (L)
Produce surround right/left channel sounds.
5
Surround (R)
6
Surround back (L)*
Produce surround back left/right channel sounds.
7
Surround back (R)*
8
Surround back*
Produces sounds mixed from surround back left/right channel sounds.
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
9
Subwoofer
This channel is counted as "0.1".
* RX-V573 only
• RX-V573 supports 2- to 7.1-channel system, and RX-V473 supports 2- to 5.1-channel speaker system.
Function
Speaker system (the number of channels)
7.1*
6.1*
5.1
4.1
3.1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
PREPARATIONS ➤ Placing speakers
2.1
●
●
●
12
En
Hide quick links:
Advertisement
Table of Contents
