Yamaha RX-V473 Owner's Manual page 71

■
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from "Meter" or "Feet".
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L (RX-V573 only),
Surround Back R (RX-V573 only), Subwoofer
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
Default
Front L, Front R, Subwoofer: 3.00 m (10.0 ft)
Center: 2.60 m (8.6 ft)
Others: 2.40 m (8.0 ft)
■
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L (RX-V573 only),
Surround Back R (RX-V573 only), Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
Default
Front L, Front R, Subwoofer: 0.0 dB
Others: -1.0 dB
■
Equalizer
Adjusts the tone with an equalizer.
❑ EQ Select
Selects the type of equalizer to be used.
Settings
Applies the parametric equalizer values obtained by the YPAO
PEQ
measurement (p.30).
Select this option when you want to adjust the equalizer manually.
GEQ (default)
For details, see "Manual equalizer adjustment".
Off Does not use the equalizer.
• "PEQ" is available only when the YPAO has been performed (p.30).
■
Manual equalizer adjustment
1
Set "EQ Select" to "GEQ".
2
Use the cursor keys (q/w) to select "Channel" and the cursor keys (e/r) to select
the desired speaker channel.
3
Use the cursor keys (q/w) to select the desired band (frequency) and the cursor
keys (e/r) to adjust the gain.
Setting range
-6.0 dB to +6.0 dB
E q u a l i z e r
E Q S e l e c t G E Q
G E Q E d i t
C h a n n e l F r o n t L
6 3 H z
1 6 0 H z
4 0 0 H z
1 k H z
2 . 5 k H z
6 . 3 k H z
1 6 k H z
B a c k : R E T U R N
4
To exit from the menu, press SETUP.
■
Test Tone
Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Settings
Off (default) Does not output test tones.
Outputs test tones automatically when you adjust the speaker balance
On
or equalizer.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
71
En