Piezo Lighter - Dometic RM24A Service Manual

Fig. 15
T o r e p l a c e f l i n t , f o l l o v t h e s e s t e p s :
1. Remove the outer burner shield by means of loosening the two screws A
Remove the lighter by loosening the screw B retaining the lighter (Fig, 76).
2.
Remove cap C and remOve the spring D and tap out any remaining piece of flint
3.
__ .
and fit a nev flxnt.
Be sure not to lose the small helical spring vhich presses the flint against
the serrated wheel.
Replacement of the serrated vheel - RM24
If after several years of use the lighter does not function properly even with a
new flint, the serrated vheel might be worn out and needs to be replaced.
1. the lighter as described above.
Release
Unscrew the rod from the serrated wheel and fit a new wheel.
2.
The rod has to be unscrewed anti-clockwise.
CAUTION
PIEZO LIGHTER (Fig. 77)
The RM36C, RM46, RM47, RM66, RM67, RM76 and RM77 models are equipped with a Piero
crystal lighting device vhich creates a spark over the burner when the button E is
p u s h e d i n f u l l y ( s e e f i g . 7 2 ) .
Fig. 76
Fig. 77
45
(Fig. 75).