Directed Electronics AutoCommand 41027T Owner's Installation Manual page 70

Auto-rearming feature
Auto-rearming is designed to protect the vehicle in case of unin-
tended disarming of the alarm.
It will automatically re-arm the alarm and lock the doors 120
seconds after any transmitter disarm occurs.
To stop Auto-rearm simply open a door or turn the ignition on
before the 120 seconds expires.
Alarm Input Operations
When armed the alarm has 6 inputs that will cause a full alarm
trigger output. Refer to the Alarm Diagnostic section for addi-
tional detail.
➤
The Door, Hood, Ignition and Brake inputs will cause an
immediate full trigger output when activated.
➤
The Sensor inputs can cause two types of outputs; Warn-
away and Full Trigger.
note! An optional two stage sensor is required for
the Sensor outputs to activate. Call Technical
Support for more information on compatible sensors.
Alarm Trigger Outputs
➤
Warn-away output: this output consists of 5 chirps of
the Horn/Siren output and 3 flashes of the parking
lights.
➤
Full Trigger output: this output consists of flashing the
Parking lights and the Horn/Siren output for 30 seconds
followed by a 5 second pause to monitor the alarm
inputs. If an alarm input is still active the output will
repeat.
© 2006 Directed Electronics
67