Directed Electronics AutoCommand 41027T Owner's Installation Manual page 45

1. Horn: The output will be pulsed during full trigger events
2. Siren: The output will be constant during full trigger
events.
10. Headlights: Selects the operation of the "Yellow/Brn" head-
light output wire when an ignition input is sensed.
1. Daytime Running: The output will activate 10 seconds
after an ignition input is sensed and cease output 1
second after the ignition input ceases.
2. LightYourWay: The output will activate for 25 seconds
immediately after the ignition input ceases.
11. Start Chirps: Selects if the "Blue" Horn/Siren output wire will
pulse when activating Remote Starter.
1. On: The Horn output will pulse 1 time at the beginning
of Remote Start
2. Off: The Horn output WILL NOT pulse at the beginning
of Remote Start
12. NA: A feature is Not Available for this Location
13. Reset All Options: Pressing a transmitter button when this
Feature Location is accessed will "Reset All Options" in both
menus to their default setting.
42
© 2006 Directed Electronics