Loading Netware Odi Drivers; One Eisa Adapter In A Client - 3Com EISA 10/100BASE-T User Manual

Table 4-1 describes how to access DOS from various operating
systems.
Operating System
OS/2
Windows 3.x
Windows 95

Loading NetWare ODI Drivers

This section describes the following conditions under which you
can use NetWare drivers:

One EISA adapter in a client

Multiple EISA adapters in a client
One EISA adapter in a server
Multiple EISA adapters in a server
One EISA Adapter in a Client
This section explains how to use the AutoLink auto installation
program on the 3C59X EtherDisk diskette to load a NetWare
DOS ODI driver (3C59X.COM). This procedure automatically
installs all necessary NetWare DOS ODI client software, modifies
the CONFIG.SYS and AUTOEXEC.BAT files for NetWare users, logs
on to the server, and updates the client software if your system
administrator has already configured a 3Install account on your
server.
Table 4-1 Accessing DOS from Other Operating
Systems
Procedure
1 Boot your computer from a plain DOS diskette.
2 Type install at the DOS command prompt to
run the 3Com install program.
1 Exit Windows completely (select File, Exit
Windows, OK).
2 Type install at the DOS command prompt to
run the 3Com install program.
1 Turn on your computer.
2 Press the F4 key as soon as you see this message:
Starting Windows 95
3 Type install at the DOS command prompt to
run the 3Com install program.
Loading NetWare ODI Drivers
4-3