Procedure Overview - 3Com EISA 10/100BASE-T User Manual

1-2 C 1: I
HAPTER
Automatic EISA configuration without jumpers
Three status LEDs
Single shielded RJ-45 connector for use at either speed
(Category 3, 4, or 5 UTP cabling for 10BASE-T Ethernet networks,
and Category 5 UTP for 100BASE-TX Fast Ethernet networks)
Diagnostic software and drivers on the 3C59X EtherDisk
diskette
The Fast EtherLink EISA adapter can be managed remotely
with Transcend
software. Driver agents for this adapter are provided on the
3C59X EtherDisk diskette.
The procedures described in this guide are shown in
Figure 1-1.
1
Install the adapter in an EISA slot.
2
Figure 1-1 Procedure Overview
NTRODUCTION
â
PC Link SmartAgent
Use the EISA configuration utility
to configure the adapter.
3
Install network drivers.
(NetWare or other)
4
Troubleshoot the adapter.
(optional)
â
network management
â