Table of Contents
Advertisement
2
Installation Tools
Installation
Procedure
I
NSTALLATION
This chapter contains Dual E3 Asynchronous Transfer Mode (ATM)
Network Interface Card (NIC) installation information.
To install this NIC in the Total Control chassis, you need a #2 Phillips and
flat-head screwdriver.
To install this NIC:
ESD: To reduce the risk of electrostatic discharge (ESD), take proper
grounding precautions before handling the NIC.
Install the NIC with or without power applied to the chassis.
1 Select a slot at the rear of the Total Control chassis for installing the NIC.
Install this NIC in slots: 1–17
CAUTION: The Dual E3 ATM NIC must be installed behind a HiPer Access
Router Card (ARC) Network Application Card (NAC).
Advertisement
Table of Contents
