Enclosure Bay Ip Addressing Commands; Add Ebipa; Disable Ebipa; Enable Ebipa - HP BL480c - ProLiant - 4 GB RAM User Manual

Enclosure Bay IP Addressing commands

ADD EBIPA

•
Command:
ADD EBIPA {SERVER | INTERCONNECT} DNS <ip address>
•
Description:
Adds a DNS server IP address to the list of DNS servers for either SERVER bays or INTERCONNECT
bays
•
Access Level/Bay level:
Administrator, Operator
•
Restrictions:
A maximum of three DNS servers can be added for EBIPA.
o
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to
o
255.

DISABLE EBIPA

CAUTION:
connectivity.
•
Command:
DISABLE EBIPA {SERVER|INTERCONNECT} [ALL | <bay number> [{ , | - } <bay
number>]]
•
Description:
Disables the ability of the Onboard Administrator to give devices in the bays IP addresses using
DHCP.
If no bay numbers are specified, then EBIPA is disabled for all bays. Devices in bays receive IP
addresses from an external server.
This causes a reset of the iLO, which causes it to attempt to get an IP address from an external DHCP
server. The interconnect is power-cycled.
•
Access level/Bay level:
Administrator, Operator
•
Restrictions:
None

ENABLE EBIPA

: This command cycles power to the interconnect and causes a loss of
Enclosure Bay IP Addressing commands 74