Show All - HP BL480c - ProLiant - 4 GB RAM User Manual

Default values are used for any parameters that would normally require user interaction.
o
•
Access level/Bay level:
All
•
Restrictions:
None

SHOW ALL

•
Command:
SHOW ALL
•
Description:
Executes all SHOW commands in succession
•
Access level/Bay level:
All
•
Restrictions:
This command only displays the bays for which you have privileges.
o
To save the output, you must configure your Telnet software to log the session to a file or increase
o
the history buffer size so that the output can be copied and pasted into another file.
Examples
OA-0018FE27577F> show all
>SHOW CONFIG
#Script Generated by Administrator
#Generated on: Wed Nov 11 06:22:18 2009
#Set Enclosure Time
SET TIMEZONE CST6CDT
#SET DATE MMDDhhmm{{CC}YY}
#Set Enclosure Information
SET ENCLOSURE ASSET TAG ""
SET ENCLOSURE NAME "OA-0018FE27577F"
SET RACK NAME "UnnamedRack"
SET POWER MODE REDUNDANT
SET POWER SAVINGS ON
#Power limit must be within the range of 950-8750
SET POWER LIMIT OFF
#Enclosure Dynamic Power Cap must be within the range of 1508-1508
#Derated Circuit Capacity must be within the range of 1508-1508
#Rated Circuit Capacity must be within the range of 1508-1508
SET ENCLOSURE POWER_CAP OFF
SET ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE None
#Set PowerDelay Information
SET INTERCONNECT POWERDELAY 1 0
SET INTERCONNECT POWERDELAY 2 0
SET INTERCONNECT POWERDELAY 3 0
SET INTERCONNECT POWERDELAY 4 0
SET SERVER POWERDELAY 1 0
SET SERVER POWERDELAY 2 0
General management commands 46