Real Time Transmission - Brother MFC-9420CN User Manual

3
Press ▲ or ▼ to select the resolution
you want.
Press Menu/Set.
Note
You can choose four different resolution
settings for black & white faxes and two for
color.
Black & White
Suitable for most typed
Standard
documents.
Good for small print and
Fine
transmits a little slower than
Standard resolution.
Good for small print or
S.Fine
artwork and transmits slower
than Fine resolution.
Use when the document has
Photo
varying shades of gray or is a
photograph. This has the
slowest transmission time.
Color
Suitable for most typed
Standard
documents.
Use when the document is a
Fine
photograph. The
transmission time is slower
than Standard resolution.
If you select S.Fine or Photo and then use
the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.

Real Time Transmission

When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the phone line is
free, the machine will start dialing and
sending.
If the memory is full, the machine will send
the document in real time (even if
Real Time TX is set to Off ).
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On for the next fax only.
Sending in real time for all faxes
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 2, 5.
Setup Send
5.Real Time TX
3
Press ▲ or ▼ to select On (or Off ).
Press Menu/Set.
Sending a fax
5
5 - 6