Table of Contents
Advertisement
Figure 2-10 Accessing the control panel
To move the control panel back into the device enclosure, lift the control panel up to align it
with the opening and push it into place until you feel the tab lock. Refer to Figure 2-11 for
details.
Figure 2-11 Storage of the control panel
Primary control panel functions
The primary control panel functions are defined as functions 01 to 20, including options to
view and manipulate IPL modes, system operating modes, IPL speed, and IPL type.
Here is a list of all available primary functions:
Function 01 – Display selected IPL type, system operating mode, and IPL speed.
Function 02 – Select IPL type, IPL speed override, and system operating mode.
Function 03 – Start IPL.
Function 04 – Lamp test.
Function 05 - Reserved.
Function 06 - Reserved.
Function 07 – SPCN functions.
Function 08 – Fast power off.
Functions 09 to 10 – Reserved.
40
IBM eServer OpenPower 710 Technical Overview and Introduction
Advertisement
Table of Contents
