Setting Up the System
Setting Up Automatic Time Configuration (NTP)
Automatic time configuration allows the Integrated Administrator to synchronize its date and
time with a blade PC supporting the Network Time Protocol (NTP).
Automatic Time Configuration Commands
Function
Set the NTPpoll interval*
Set the primary NTP server
Set the secondary NTP server
Disable the secondary NTP server
Enable NTP
Disable NTP
* If an NTP poll interval is not set, it will default to 720 seconds. The minimum time is 60
seconds and the maximum time is 9999 seconds.
Configuring SNMP Support
✎
Only enclosure administrators may execute these tasks.
6-14
Command
SET NTP POLL <seconds>
SET NTP PRIMARY
<ip address>
SET NTP SECONDARY
<ip address>
SET NTP SECONDARY
NONE
ENABLE NTP
DISABLE NTP
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide