Setting Up Automatic Time Configuration (Ntp) - HP BladeSystem bc2000 - Blade PC User Manual

Setting Up Automatic Time Configuration (NTP)

Automatic time configuration allows the Integrated Administrator to synchronize its date and time with
a blade PC supporting the Network Time Protocol (NTP).
Table 6-4 Automatic Time Configuration Commands
Function
Set the NTPpoll interval*
Set the primary NTP server
Set the secondary NTP server
Disable the secondary NTP server
Enable NTP
Disable NTP
* If an NTP poll interval is not set, it will default to 720 seconds. The minimum time is 60 seconds and
the maximum time is 9999 seconds.
84 Chapter 6 Setting Up the System
Command
SET NTP POLL
<seconds>
SET NTP PRIMARY
<ip address>
SET NTP SECONDARY <ip address>
SET NTP SECONDARY NONE
ENABLE NTP
DISABLE NTP
ENWW