Command Line Interface; Accessing The Command Line Interface; Accessing Remotely Through The Management Connector - HP Bc1500 - BladeSystem - Blade PC User Manual

This chapter provides reference material for operating the Integrated Administrator Command
Line Interface (CLI). This chapter provides command line related information with the following
sections:
■

Accessing the Command Line Interface

■
Operating the Command Line Interface
❏
General commands
❏
General management commands
❏
User account commands
❏
Enclosure network configuration commands
❏
Enclosure management commands
❏
Blade PC management commands
■
Functionality exclusive to the command line interface
For a detailed explanation of the command line conventions used in this document, see Appendix
A, "Command Line Conventions."
For easy reference, the index of this book also provides a comprehensive listing of the commands
supported by the Integrated Administrator.
Accessing the Command Line Interface
You can access the CLI remotely through the management (10/100 Ethernet) connector, locally
through the console (serial) connector on the rear panel of the enclosure, or through any uplink
depending on VLAN configuration.

Accessing Remotely through the Management Connector

To access the Integrated Administrator command line interface remotely through the
management (10/100 Ethernet) connector:
1. Get the default host name from the settings tag attached to the interconnect tray.
2. Open a Telnet or Secure Shell application and type the IP address or DNS name for the
enclosure you wish to access.
CAUTION: Using Telnet instead of Secure Shell means your remote session, including password,
Ä
appears in clear text on that network.
3. Type the user name and password into the Login prompt.
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide

Command Line Interface

5
5-1